Basic Cable Knowledge,Cable manufacturer,Solar Cable Auto cable marine cable

1. The cable should not run under overload, and the lead package of the cable should not expand or crack.2. The parts of the cables entering and leaving the equipment should be sealed well, and there should be no holes with a diameter greater than 10mm, otherwise they should be blocked with fire blo...

Photovoltaic electrode tubes include a variety of electrode tubes, each with its own role.1. Blocking diodes. The blocking diode is placed on the positive line between the module and the battery to prevent the battery current from flowing back to the photovoltaic array at night or on cloudy days. So...

Basic principles of cable selectionThe cable selection of photovoltaic power generation follows the general requirements of cable selection, that is, the type is selected according to the voltage level, the allowable current for continuous operation, the short-circuit thermal stability, the allowabl...

1. Project locationLarge-scale ground photovoltaic power plants are generally located in suburbs or remote deserts and hills. Distributed photovoltaics emphasize on-site consumption, and are generally located in industrial plants, commercial buildings, agricultural facilities, municipal and other pu...

10mm Solar dc cable Problems that are easy to occur in the construction of solar energy installationProblems that are easy to appear in the laying and construction of 10mm Solar dc cableThe laying and construction of photovoltaic cables is an extremely important project. In order to ensure its norma...

Photovoltaic cables are often exposed to sunlight, and solar systems are often used in harsh environmental conditions, such as high temperatures and ultraviolet radiation. In Europe, sunny and favourable terrain will result in on-site temperatures of up to 100C for solar systems. Now, the variety of...

So what damage will thunderstorms cause to photovoltaic power generation equipment?1. Thunderstorms can cause damage to solar cell modules.Solar photovoltaic panels are not only the core part of photovoltaic power generation equipment, but also the most valuable part of photovoltaic power generation...

At present, the most effective and widespread method among the existing measures is to connect the metal parts of electrical equipment to the earth. The four parts of grounding equipment, grounding body, lead-in wire and earth make up the grounding system. Good grounding is the most critical step in...